UV-1280 - Настройки

VisEase is a simplified control application offered in response to users that prefer to measure data within the control software by the simplest way possible, without data analysis, report creation, or printing.

This trace quantity measurement system can perform measurements simply and accurately, even with ultra-small sample volumes on the order of a few μL.

Multifunctional Software with Multiple Measurement Functions / Enhanced GLP/GMP Support Functions

Samples are placed in cells for measurements.

This is used to measure samples, without diluting them, with an absorbance too high to be measured using a standard square cell with an optical path length of 10 mm.

When the concentration of the sample is too low to be measured using a standard cell with an optical path length of 10 mm, a cell with a longer optical path length is used to enable measurement at the optimum absorption sensitivity.

The following accessories are used to measure micro-volume samples.

The following accessories are used for biological component measurement, enzymatic activity measurement and reaction rate analysis for which the sample must be kept at a constant temperature.

With relative specular reflectance measurement, the reflectance is calculated from the strength ratio after comparing the light reflected from the reference sample with the light reflected from the measurement sample.

The transmittance of thin samples such as film with little scattering can be measured by combining the film holder with the standard sample compartment.

VisEase is a simplified control application offered in response to users that prefer to measure data within the control software by the simplest way possible, without data analysis, report creation, or printing.